Get notified when it's back in stock!
INTRODUCTION
Designed as a Power Tool / Drill motor and may replace motors in many 3/8in drills and other cordless outdoor tools.
As well as a popular choice for DIY Electronics and Robotics, PowerWheels, Gate Openers, and More.
FEATURES
★ RS-550s Brushed DC Motor Weight: ~7.7oz (218g) Body Length: 2.24in (57mm) Body Diameter: 1.46in (37.5mm)
★ Operating Voltage: ~6v-20v | Optimal Volt Range: 12v-18v | 18 Volt Nominal (Optimal Power, Speed, and Torque near 18 volts)
★ Shaft Length ~0.35 inch / ~11/32in or ~9mm | Diameter ~0.125 inch / 1/8in or ~3.175mm | Style: Round | Stall Current: ~85A | Efficiency: ~70% | No Load RPM: ~20000 RPMs | RPM Peak Efficiency: ~17000 rpms
★ Designed as a Power Tool Drill motor and may replace motors in many 3/8in drills and other cordless and outdoor tools. A popular choice for DIY Electronics and Robotics, PowerWheels, and some Gate Openers. Will not work or fit in all models, be sure to check the requirements of your specific application before purchasing
★ PLEASE NOTE: If your replacing a motor please be sure to verify the motor matches your dimensions and shaft length and diameter before purchasing.
SPECIFICATION
Type | Tool Parts |
Operating Voltage | ~6v - 24v |
No Load RPM | ~19300 |
No Load Current | ~1.2A |
Efficiency | ~70% RPM Peak Efficiency: ~17250 |
Current Peak Efficiency | ~8-10A Dimensions |
Weight | 218g |
WHAT'S IN THE BOX
ORDERING TIPS
* The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.
* As the manufacturer needs the serial number to provide a replacement, we highly recommend you keep the original packing box or take picture of the code before discarding it. Thank you!